ATS-00247 (former catalog number ATS-14126P-S-L-4T-CG-POE-HC). The AccelTex Solutions Heated & Cooled PoE enclosure allows an access point to be installed in an outdoor or other temperature-limiting environment. The heater, fan and AP are all powered by a single PoE cable run from the network switch. The enclosure ships ready for an AP and external antenna installation.This version is for a 4-Element RPTNC External Antenna. <br /> The enclosure system components include:<ul><li>14x12x6 polycarbonate enclosure with solid door and latch lock</li><li>Ethernet surge suppressor for 802.3at/af/bt</li><li>60W PoE Injector and Line Cord (UPOE & 802.3at/af Type 3)</li><li>12VDC 15W Heater and 3" Fan</li><li>DC Adjustable Thermostat (Fahrenheit)</li><li>Ethernet Cable (For AP. Customer provides Ethernet to enclosure suppressor)</li><li>Ethernet Surge Suppressor pre-wired to ground</li><li>IP68 Rated Cord Grip</li><li>Blank backplate provides 10"x10.5" mounting area (Recommend 1/2" self-tap screws)</li><li>Vents</li><li>10" DIN rail</li><li>Dual-Layered Fan Filter</li><li>7-Port Enclosure Termination Ground Bar</li><li>Ground Lug Assembly with 1/4" Ring Terminal Connection Point</li><li>RPTNC Bulkhead Jack to Plug Lightning Arrestors (4)</li><li>RPTNC Jack to RPTNC Plug Cable Assemblies (4)</li><li>Right-Angle RPTNC Jack to RPTNC Plug Adapters (4)</li></ul>